JJGeisler

Make-up Water Dosing System

drip_system_04.jpg (32083 bytes)

drip_system_01.jpg (26299 bytes) drip_system_03.jpg (23301 bytes)
This is the overall view of the complete system.  The 5 stage RO system is mounted on the wall and connected to the RO holding tank on the right. The RO holding tank has an auto shut-off float valve to regulate the water level.  The tank holds about 4 gallons of RO. The Kalkwasser Reactor is mounted below the holding tank, this allows a gravity feed to the reactor as water is pumped out of the reactor.
drip_system_05.jpg (26566 bytes) drip_pump.jpg (26265 bytes)
From the Kalkwasser Reactor the water is pumped up to the dosing pump. Close-up of the Kangaroo 324 peristaltic dosing pump. From the dosing pump the Kalkwasser liquid is pumped upstairs approximately eight feet elevation and about five feet of horizontal to the main tank.
Return to DIY page